HOME \ PRODUCT OVERVIEW \ MAGNUM LOOK
MAGNUM Look mirror heating always provides a clear view when shaving, cutting hair and applying make-up. No more wiping with a towel to see yourself in the mirror after showering or using hot water.
MAGNUM Look is connected and easily switched through the light switch and prevents condensation in no time. It also prevents the unpleasant towel marks that remain after removing condensation. Connecting directly to the mains, through the light switch in the bathroom, avoids unnecessary waste of energy.
MAGNUM Look mirror heating is a self-adhesive heating foil element that can be applied directly to the back of the mirror. The elements are double insulated and can therefore also be used in humid rooms.
The capacity achieves a fast heating-up time of approx. 5 to 8 minutes. In that short time, the mirror is already brought to a temperature of approx. 40°C and condensation is prevented. The maximum achievable mirror temperature is limited to approx. 50°C. This makes the product absolutely safe to touch.
The mirror must not be damaged (e.g. broken off pieces of the edge, cut to size by hand, etc.) because of possible cracking due to tension differences during heating. For fixing, you can simply use the self-adhesive backing. This should be applied directly to the back of the mirror.
ATTENTION: The film has a very high adhesive strength, therefore it is permanently attached.
|310035||50 Watt||Round 35 cm|
|310029||27 Watt||29 x 29 cm|
|310050||50 Watt||36 x 50 cm|
|310058||50 Watt||40 x 58 cm|
|310055||70 Watt||50 x 58 cm|
|310075||100 Watt||57 x 75 cm|
|310085||120 Watt||58 x 85 cm|
|310110||150 Watt||57 x 110 cm|
|System height||1 mm|
|System width||Various sizes|
|Min. setting height||1 mm|
|Power||50 – 150 Watt|
|In wet areas||V|
|Type of heating||Infrared|
|Regulation||Light switch (no dimmer)|
|Certification||Kema, CE, Fimko|
- Heating foil with self-adhesive backing
- ±1 metre connection cable
- Installation instructions
2 year warranty on the electrical function.